Autonomous handling sets
Set of hydraulic supports ZPH.20-A2
Set of hydraulic supports type ZPH.20-A2 is a reusable device, designed to self-reloading (self-loading or self-unloading) of special 20-foot containers of total weight up to 16,0 t.
Set of hydraulic supports ZPH.20-A2 is a stand-alone system of the container, fully integrated structurally and functionally with the container. This set consists of four hydraulic servomotors - pivotally mounted on supporting pillars in the corners of the container, the hydraulic installation, and the hydraulic system - built in the hydraulic module, and batteries and control unit – built in the electric power module of the container. Each of the functional units forming a part of the set is a compact and closed structure - built-up inside the container, susceptible to operation and repair.
While operating, the set gets electricity from the container installation. Folding and unfolding of the hydraulic servomotors is done manually by two members of container staff – with the assistance of gas springs. The set is controlled remotely, semi-automatically, at a safe distance from the container - using remote control desktop, there is a possibility of using additional manual control - with the use of the control board in the hydraulics and battery module.
The applied solution of set of hydraulic supports allows for its use in self-reloading of the container in the area, where the difficult terrain does not allow for use of external handling equipment (cranes, forklifts, etc.) or they are currently not available. This solution also allows for enhanced containers’ mobility without involving additional means of transport and manpower, as well as in case of rapid evacuation in emergency situations.
Set of hydraulic supports ZPH.20-A2 is capable for operation when the vehicle is stationary with the transported container.
Using the set as intended and complying with the rigors of technical support is a guarantee of its long-term and reliable operation.
Set of hydraulic supports ZPH.20-A2 is a stand-alone system of the container, fully integrated structurally and functionally with the container. This set consists of four hydraulic servomotors - pivotally mounted on supporting pillars in the corners of the container, the hydraulic installation, and the hydraulic system - built in the hydraulic module, and batteries and control unit – built in the electric power module of the container. Each of the functional units forming a part of the set is a compact and closed structure - built-up inside the container, susceptible to operation and repair.
While operating, the set gets electricity from the container installation. Folding and unfolding of the hydraulic servomotors is done manually by two members of container staff – with the assistance of gas springs. The set is controlled remotely, semi-automatically, at a safe distance from the container - using remote control desktop, there is a possibility of using additional manual control - with the use of the control board in the hydraulics and battery module.
The applied solution of set of hydraulic supports allows for its use in self-reloading of the container in the area, where the difficult terrain does not allow for use of external handling equipment (cranes, forklifts, etc.) or they are currently not available. This solution also allows for enhanced containers’ mobility without involving additional means of transport and manpower, as well as in case of rapid evacuation in emergency situations.
Set of hydraulic supports ZPH.20-A2 is capable for operation when the vehicle is stationary with the transported container.
Using the set as intended and complying with the rigors of technical support is a guarantee of its long-term and reliable operation.
Technical and operation parameters
| Type of supports' set | ZPH.20-A2 |
| Marking of type/version of supports’ set | ZPH.20-A2,w.W2; ZPH.20-A2,w.W3 ZPH.20-A2,w.M2; ZPH.20-A2,w.M3 |
| Document marking of supports’ set | ZPH.20.A2-0.00.00.00.00.00 |
| Total weight of supports’ set | 950 kg |
| Acceptable total weight of lifted container | 16 000 kg |
| Acceptable load on one support | 8 000 kg |
| Total unloading time from the vehicle | up to 10 min |
| Lifting height of container | max. 1800 mm |
| Leveling the container on the slope | automatic |
| Possibility of container leveling on the slope | up to 3° |
| Accuracy of container leveling | 1º |
| Time of full lifting or lowering of the container | about 5 min |
| Total time of container unloading from the vehicle | up to 10 min |
| Total time of container loading on the vehicle | up to 15 min. |
| Possible to load on vehicle chassis | on the slope up to 3° |
| Recommended number of operation personnel | operator + 1 person |
| Maximum uninterrupted operation time of hydraulic system and supports | max. 15 min |
| Hydraulics and control systems supply voltage | 24 V (27,6 V) |
| Type of hydraulic oil/capacity power supply system | UNIVIS HVI 26 ESCO/60 l |
| Range of use temperature of supports’ set | from –30°C to +55°C |
| Range of storage temperature of supports’ set | from –40°C to +65°C |