Special purpose containers
Container workshop body KNW.15-01
Container workshop body type KNW.15-01 is versatile meant for complex operation and repair of weaponry equipment in stationary and field conditions.
The container workshop body KNW.15-01 is built based on the steel structure of the basic 15-foot container, according to ISO standards. The walls of the body are built with laminated sandwich panels with high thermal and sound insulation and required mechanical strength. On the wall of the front body there are four modules of basic equipment mounted – meant for securing the functioning of the workshop, i.e.: air conditioning module, the filtering and ventilation module, combustion heating module, and fuel tank.
Inside the utility compartment of the body there are hydraulic module and power supply module mounted. On the rear wall of the body the stairs are mounted, the screw supports and the crane with electric or manual winch (with a capacity of up to 1000 kg).
Workshop body is mobile according to the needs, the supporting structure is stable, and it is possible to reload it in all conditions - with the use of autonomous docking system ZPH.15-02, w.WR.
Workshop body provides comfortable working environment for the workshop personnel, independent of atmospheric conditions, maintaining the required temperature inside the utility compartment, and the quality of air free from dust and possible contamination.
Depending on the specialist equipment used – mounted in the utility compartment, the workshop body KNW.15-01 can be used for maintenance and repair of e.g.: tracked vehicles, armored personnel carriers, cars, helicopters, sapper equipment, firing artillery weapons, electrical, optical, and night vision equipment.
Workshop body KNW.15-01 workshop is intended to be transported by container transport set KZT.15-01 - based on all-terrain vehicle STAR 266K (6x6) - including off-road trailer PTJ.04-01.
The container workshop body KNW.15-01 is built based on the steel structure of the basic 15-foot container, according to ISO standards. The walls of the body are built with laminated sandwich panels with high thermal and sound insulation and required mechanical strength. On the wall of the front body there are four modules of basic equipment mounted – meant for securing the functioning of the workshop, i.e.: air conditioning module, the filtering and ventilation module, combustion heating module, and fuel tank.
Inside the utility compartment of the body there are hydraulic module and power supply module mounted. On the rear wall of the body the stairs are mounted, the screw supports and the crane with electric or manual winch (with a capacity of up to 1000 kg).
Workshop body is mobile according to the needs, the supporting structure is stable, and it is possible to reload it in all conditions - with the use of autonomous docking system ZPH.15-02, w.WR.
Workshop body provides comfortable working environment for the workshop personnel, independent of atmospheric conditions, maintaining the required temperature inside the utility compartment, and the quality of air free from dust and possible contamination.
Depending on the specialist equipment used – mounted in the utility compartment, the workshop body KNW.15-01 can be used for maintenance and repair of e.g.: tracked vehicles, armored personnel carriers, cars, helicopters, sapper equipment, firing artillery weapons, electrical, optical, and night vision equipment.
Workshop body KNW.15-01 workshop is intended to be transported by container transport set KZT.15-01 - based on all-terrain vehicle STAR 266K (6x6) - including off-road trailer PTJ.04-01.
Technical and operation parameters
| Type od workshop body | KNW.15-01 |
| Document marking of workshop body | KNW.15.01-00.00.00.00.00 |
| Empty weight of the basic version of workshop body | 4 400 kg |
| Acceptable total weight of workshop body with equipment | up to 5 000 kg (depending on equipment) |
| Dimensions of container workshop body (length x width x height) |
4,522 x 2,438 x 2,438 m |
| Utility area of workshop body | 8,5 m² |
| Utility area of side tent | 4,0 m² |
| Time of disassembly of workshop body from transport means | up to 10 min (using supports) |
| Preparation time of workshop body for operation | up to 30 min (depending on conditions) |
| Time of assembly of workshop body to transport means | up to 15 min (using supports) |
| Preparation time of workshop body for transport |
up to 30 min (depending on conditions) |
| Lifting height of workshop body (using supports ZPH.15-02,w.WR) |
max. 1 800 mm |
| Recommended number of operation personnel of workshop body | driver + 3 people |
| Range of use temperature of workshop body | od -30°C do +55°C |
| Range of storage temperature of workshop body | od -40ºC do +65ºC |